فایل ورد (word) مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves دارای 24 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد فایل ورد (word) مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
توجه : در صورت مشاهده بهم ريختگي احتمالي در متون زير ،دليل ان کپي کردن اين مطالب از داخل فایل ورد مي باشد و در فايل اصلي فایل ورد (word) مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves،به هيچ وجه بهم ريختگي وجود ندارد
بخشی از متن فایل ورد (word) مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves :
سال انتشار : 2014
تعداد صفحات :24
Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilineThe use of non-linear nite elements to assess the e ect of transverse reinforcement amount on the shape of shear-torsion interaction curve for RC beams is addressed. At rst, FEM results for specimens under pure torsion and combined shear and torsion were validated with previous outcomes. Secondly, reference specimens were made with the minimum required transverse reinforcement at rst. Each specimen was analyzed with the nite element method and tested under similar conditions in the laboratory, and the results, including the cracking pattern, cracking and ultimate loads, and shear-torsion interaction curves, were found to be in very good agreement. Finally, the transverse reinforcement amount was increased to certain extents and similar results were determined. FEM interaction curve stood below the experimental curve. It was also deduced that, from a certain increase in the transverse reinforcement, the shear-torsion interaction curve transforms from linear to elliptical.ar ranges of interaction curves